Start with the parts that do the protecting
The CoyoteCollar is built around two materials: nylon webbing for the band and hard chrome-plated plastic spikes for the deterrent. The spikes attach to the webbing with a stiff double-sided Velcro, which is what makes the collar adjustable and easy to reconfigure. Because those three components—webbing, spikes, and Velcro—do different jobs, your care routine should treat them separately.
The catalog describes the collar as durable and easy to clean, and the waterproof construction is deliberate: nylon webbing and chrome-plated plastic were chosen so the collar can handle wet conditions without rusting or losing shape. That same waterproof design shapes how you should clean it.
A simple cleaning routine for the webbing and spikes
You do not need special equipment. The goal is to remove dirt, sweat, and outdoor residue without loosening the Velcro or damaging the spike coating.
- Remove the spikes first: Peel the spikes off the Velcro backing so you can clean the webbing and the spike bases separately. This also lets you inspect each spike for wear.
- Wipe or rinse the nylon webbing: Because the webbing is waterproof, a damp cloth or a quick rinse is enough for routine cleaning. Avoid harsh solvents that could degrade the nylon over time.
- Clean the chrome-plated plastic spikes: Wipe each spike with a damp cloth. The chrome plating is there to resist corrosion, but grit trapped around the base can dull the finish, so check the attachment points as you go.
- Let everything dry completely: Velcro loses grip when it is wet or dirty. Air-dry the webbing and spikes fully before reassembling so the hook-and-loop holds firmly.
- Reattach the spikes and check the fit: Press each spike firmly back onto the Velcro. Then put the collar on your dog and confirm it still sits correctly—removing and reattaching spikes can shift the spacing slightly.
Keep the Velcro attachment working
The stiff double-sided Velcro is the heart of the CoyoteCollar's adjustability. It is what lets you remove spikes to size the collar down or to use it as a throat guard under a vest, then put the spikes back for full coverage. If the Velcro gets clogged with hair, dirt, or lint, spikes can shift or peel loose.
After each cleaning, and periodically during normal wear, pick visible debris out of the hook-and-loop surface. Press the spikes back down firmly and tug each one gently to confirm it is seated. If a spike no longer holds, the Velcro patch or the spike base may need attention—check the other spikes before assuming the whole collar needs replacing.
CoyoteCollar details that affect care
- CoyoteCollar: The collar uses nylon webbing and hard chrome-plated plastic spikes, a combination chosen for waterproof construction. Waterproof materials mean you can clean with a damp cloth or rinse without worrying about rust, but you still need to dry the Velcro before use.

CoyoteCollar - CoyoteCollar: Spikes attach to the webbing with a stiff double-sided Velcro. This is the part most likely to collect debris; keeping it clean is the key maintenance task.
- CoyoteCollar: The spikes are lightweight and not dangerous to handle, but with enough pressure they are sharp enough to hurt. Handle the spikes carefully during cleaning, especially when pressing them back onto the Velcro.
Resizing and reconfiguring without damaging the collar
The CoyoteCollar is designed to be adjusted by removing spikes and tightening the collar. You cannot adjust it larger than the maximum size listed for each collar size, but you can always size down by taking spikes off. That flexibility is useful, but it also means the collar's fit depends on how you manage the spikes.
- Measure before you remove spikes: If you are resizing, measure your dog's neck circumference first, then remove only the spikes you need to reach a comfortable fit.
- Using the collar as a throat guard: Under a vest, remove spikes until just enough remain to cover the throat, then put the spikes back on for full neck coverage when you use the collar alone.
- Wearing it over a vest: If you plan to use the collar on top of a CoyoteVest or SpikeVest, measure the neck with the vest on and order a size large enough to fit over it.
When to replace a spike or the collar
The CoyoteCollar is built to last, but the spikes and Velcro are wear items. Check the spikes periodically for cracks, loose plating, or a base that no longer grips the Velcro. If a single spike is damaged, replace it rather than using the collar with a compromised spike. If the Velcro itself stops holding spikes securely after cleaning, the collar may need to be replaced.
The catalog does not specify a replacement schedule or a service life, so base your decision on condition rather than a calendar. A collar that stays clean, holds its spikes, and fits correctly is doing its job.

